?2004 littelfuse, inc. m2 - 1 http://www.littelfuse.com thyristor product catalog +1 972-580-7777 lead form dimensions m2 the to-202ab, to-220ab, and to -92 package configurations, because of their unique design, can be mounted in a variety of methods, depending upon heat sink requirements and circuit packaging methods. any of the derived types shown in this sec- tion are available as standard parts direct from the factory. cus- tom package variations are available. consult the factory for more information. to designate lead form options, simply indicate the type number at the end of the teccor standard part number. example: q2004f312 (signifies type 12) note: when ordering a to-202 f package, include a 1 for stan- dard full tab package. when ordering anything other than full tab, remove the 1 and add the lead form type. see ?description of part numbers? in the product selection guide of this catalog for a complete description of teccor part numbers. lead bending specifications leads may be bent easily and may be bent to any desired angle, provided that the bend is made at a minimum 0.063" (0.1 for to-218) away from the package body with a minimum radius of 0.032". do-15x device leads may be bent with a minimum radius of 0.050", and do-35 device leads may be bent with a minimum radius of 0.028". leads should be held firmly between the pack- age body and the bend, so that strain on the leads is not trans- mitted to the package body. when bending leads in the plane of the leads (spreading), bend only the narrow part. sharp angle bends should be done only once, as repetitive bend- ing will fatigue and break the leads. m2
http://www.littelfuse.com m2 - 2 ?2004 littelfuse, inc. +1 972-580-7777 thyristor product catalog lead form dimensions data sheets to-202ab type 11 ? f package to-202ab type 12 ? f package to-202ab type 2 ? f package to-202ab type 21 ? f package dimension inches millimeters min max min max a 0.080 0.120 2.03 3.05 b 0.301 0.361 7.65 9.17 c 0.080 0.120 2.03 3.05 dimension inches millimeters min max min max a 0.435 0.495 11.05 12.57 b 0.120 0.160 3.05 4.06 tab common to mt2 / anode mt1 / cathode mt2 / anode gate a b c mt2 / anode tab common to mt2 / anode mt1 / cathode mt2 / anode gate a b dimension inches millimeters min max min max a 0.240 0.260 6.100 6.60 b 0.030 0.050 0.762 1.27 dimension inches millimeters min max min max a 0.030 0.050 0.762 1.27 b 0.240 0.260 6.100 6.60 c 0.080 0.120 2.030 3.05 d 0.301 0.361 7.650 9.17 e 0.080 0.120 2.030 3.05 a mt1 / cathode mt2 / anode gate b mt1 / cathode mt2 / anode gate c d e mt2 / anode a b
?2004 littelfuse, inc. m2 - 3 http://www.littelfuse.com thyristor product catalog +1 972-580-7777 data sheets lead form dimensions to-202ab type 23 ? f package sidac only to-202ab type 26 ? f package to-202ab type 3 ? f package non-isolated to-202ab type 32 ? f package non-isolated dimension inches millimeters min max min max a 0.240 0.260 6.100 6.60 b 0.030 0.050 0.762 1.27 c 0.030 0.050 0.762 1.27 dimension inches millimeters min max min max a 0.240 0.260 6.100 6.60 b 0.030 0.050 0.762 1.27 c 0.050 0.070 0.127 1.78 d 0.095 0.105 2.410 2.67 e 0.172 0.202 4.370 5.13 mt1 / pin 1 mt2 / pin 2 c a b gate a mt2 / anode mt1 / cathode b e c d dimension inches millimeters min max min max a 0.030 0.050 0.762 1.27 b 0.645 0.705 16.380 17.91 dimension inches millimeters min max min max a 0.030 0.050 0.762 1.27 b 0.435 0.495 11.050 12.57 c 0.120 0.160 3.050 4.06 mt2 / anode mt1 / cathode a b gate mt2 / anode mt1 / cathode gate b c a
http://www.littelfuse.com m2 - 4 ?2004 littelfuse, inc. +1 972-580-7777 thyristor product catalog lead form dimensions data sheets to-202ab type 4 ? f package to-202ab type 41 ? f package to-202ab type 43 ? f package surface mount to-220 type 51 ? r or l package replaces rca 6249 dimension inches millimeters min max min max a 0.240 0.260 6.100 6.600 b 0.114 0.134 2.900 3.400 c 0.023 0.029 0.584 0.737 d 0.030 0.050 0.762 1.270 e 0.297 0.327 7.540 8.310 f 0.030 0.050 0.765 1.270 g 0.297 0.327 7.540 8.310 dimension inches millimeters min max min max a 0.380 0.420 9.65 10.67 b 0.180 0.220 4.57 5.59 a b c mt2 / anode d e f g gate mt1 / cathode mt2 / anode gate mt1 / cathode b a dimension inches millimeters min max min max a 0.030 0.050 0.762 1.270 b 0.680 0.760 17.270 19.300 c 0.110 0.130 2.800 3.300 d 0.080 0.100 2.030 2.540 e 0.080 0.100 2.030 2.540 f 0.110 0.130 2.800 3.300 g 0.000 0.013 0.000 0.330 dimension inches millimeters min max min max a 0.320 0.340 8.13 8.64 b 0.190 4.83 c 0.795 0.850 20.19 21.59 mt2 / anode a gate mt1 / cathode b f e d c 0.150 0.450 0.150 0.050 five plcs pad outline g a c mt2 / anode gate b ref only mounting tab common to mt2 / anode for non-isolated r package mt1 / cathode
?2004 littelfuse, inc. m2 - 5 http://www.littelfuse.com thyristor product catalog +1 972-580-7777 data sheets lead form dimensions to-220 type 52 ? r or l package to-220 type 53 ? r or l package to-220 type 54 ? r package replaces motorola form 4, g.e. type 4, rca 6206 to-220 type 55 ? r or l package replaces g.e. type 5 dimension inches millimeters min max min max a 0.169 0.189 4.29 4.80 b 0.040 0.060 1.02 1.52 c 0.250 6.35 d 0.110 0.170 2.79 4.32 dimension inches millimeters min max min max a 0.175 4.45 b 0.542 0.582 13.77 14.78 c 0.167 0.207 4.24 5.26 d 0.355 0.395 9.02 10.03 a c gate / trigger mt2 / anode mt1 / cathode b mounting tab common to mt2 / anode for non-isolated r package d mounting tab common to mt2 / anode for non-isolated r package mt1 / cathode mt2 / anode gate / trigger mt2 / anode a d c b dimension inches millimeters min max min max a 0.040 0.070 1.02 1.78 b 0.500 12.70 dimension inches millimeters min max min max a 0.065 0.095 1.65 2.41 b 0.353 0.433 8.97 11.00 c 0.115 0.130 2.92 3.30 a mt2 / anode gate mt1 / cathode b mounting tab common to mt2 / anode for non-isolated r package mt1 / cathode mt2 / anode gate / trigger c b a mt2 / anode
http://www.littelfuse.com m2 - 6 ?2004 littelfuse, inc. +1 972-580-7777 thyristor product catalog lead form dimensions data sheets to-220 type 56 ? r or l package replaces g.e. type 6, motorola lead form 3, rca 6221 to-220 type 57 ? r package similar to to-66, gate-cathode reversed to-220 type 58 ? r or l package to-220 type 59 ? r or l package dimension inches millimeters min max min max a 0.570 0.590 14.48 14.99 b 0.120 0.130 3.05 3.30 c 0.172 0.202 4.37 5.13 dimension inches millimeters min max min max a 0.040 0.070 1.02 1.78 b 0.570 0.590 14.48 14.99 c 0.340 0.422 8.64 10.72 mounting tab common to mt2 / anode for non-isolated r package mt1 / cathode a c mt2 / anode gate / trigger mt2 / anode b mt1 / cathode c gate mt2 / anode b a dimension inches millimeters min max min max a 0.175 4.45 b 0.542 0.582 13.77 14.78 c 0.167 0.207 4.24 5.26 d 0.355 0.395 9.02 10.03 dimension inches millimeters min max min max a 0.685 0.725 17.40 18.42 b 0.558 0.598 14.17 15.19 c 0.375 9.53 d 0.250 6.35 mounting tab common to mt2 / anode for non-isolated r package mt1 / cathode gate mt2 / anode a d c b mt2 / anode mounting tab common to mt2 / anode for non-isolated r package mt1 / cathode gate d c b mt2 / anode mt2 / anode a
?2004 littelfuse, inc. m2 - 7 http://www.littelfuse.com thyristor product catalog +1 972-580-7777 data sheets lead form dimensions to-220 type 65 ? r or l package replaces rca 6210 to-220 type 67 ? r package surface mount to-220 type 68 ? r or l package surface mount to-92 type 70 ? e package sidac only dimension inches millimeters min max min max a 0.550 0.580 13.97 14.73 b 0.820 0.860 20.83 21.84 c 0.530 0.570 13.46 14.48 d 0.080 0.120 2.03 3.05 dimension inches millimeters min max min max a 0.780 0.850 19.05 21.59 b 0.080 0.100 2.03 2.54 c 0.110 0.130 2.79 3.30 d 0.013 0.33 mt1 / cathode mt2 / anode a b mounting tab common to mt2 / anode for non-isolated r package gate / trigger mt2 / anode c d mt1 / cathode gate b c a d mt2 / anode 0.460 0.270 0.170 0.150 0.050 typ 0.155 0.230 0.115 0.860 pad outline this footprint optional dimension inches millimeters min max min max a 0.780 0.850 19.05 21.59 b 0.080 0.100 2.03 2.54 c 0.110 0.130 2.79 3.30 d 0.013 0.33 dimension inches millimeters min max min max a 0.060 1.52 b 0.50 12.7 mt1 / cathode gate / trigger mt2 / anode b c a d mounting tab common to mt2 / anode for non-isolated r package 0.460 0.270 0.170 .150 0.860 0.050 typ 0.045 0.055 typ 0.230 0.115 pad outline this footprint optional a mt1 / pin 1 b mt2 / pin 3 flat side
http://www.littelfuse.com m2 - 8 ?2004 littelfuse, inc. +1 972-580-7777 thyristor product catalog lead form dimensions data sheets to-92 type 73 ? e package surface mount to-92 type 75 ? e package replaces to-5 pinout to-218 type 81 ? k, m, j, or w packages to-218 type 82 ? m and w packages dimension inches millimeters min max min max a 0.000 0.010 0.000 0.254 b 0.052 0.067 1.320 1.700 c 0.295 0.315 7.490 8.000 dimension inches millimeters min max min max a 0.400 10.16 b 0.500 12.70 c 0.080 0.120 2.03 3.05 d 0.045 0.085 1.14 2.16 e 0.180 0.220 4.57 5.59 f 0.080 0.120 2.03 3.05 a b c mt2 / anode/ pin 3 gate / pin 2 mt1 / cathode / pin 1 0.034 typ 0.016 typ 0.08 pad outline mt2 / anode / pin 3 f b a gate / pin 2 flat side d typ e c mt1 / cathode / pin 1 gate / pin 2 dimension inches millimeters min max min max a 0.080 0.120 2.03 3.05 b 0.580 0.640 14.73 16.26 dimension inches millimeters min max min max a 0.095 2.41 b 0.080 0.120 2.03 3.05 c 0.580 0.640 14.73 16.26 b mt1 / cathode a gate mounting tab common to mt2 / anode on w package mt2 / anode c mt1 / cathode b gate mounting tab common to mt2 / anode a
?2004 littelfuse, inc. m2 - 9 http://www.littelfuse.com thyristor product catalog +1 972-580-7777 data sheets lead form dimensions do-35 type 91 ? y package do-35 type 92 ? y package do-35 type 93 ? y package surface mount dimension inches millimeters min max min max a 0.519 0.521 12.18 13.23 b 0.140 0.172 3.56 4.37 dimension inches millimeters min max min max a 0.610 0.630 15.49 16.00 b 0.140 0.172 3.56 4.37 a b a b dimension inches millimeters min max min max a 0.020 0.060 0.508 1.52 b 0.290 0.310 7.370 7.87 c 0.370 0.430 9.400 10.92 d 0.040 0.060 1.020 1.52 b c a d
notes
|
